• SPLITMUX-4X4-HDVWC
  • 4x4 HDMI Multiviewer / Video Matrix Switch / Video Wall Processor
  •  Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200.
  •  Each input can be independently connected to any or all outputs.
  •  Quad, Picture in Picture, and Full Screen display modes.
  •  Fluid, real-time video performance with 60 frames per second (fps) in all four quadrants.
  •  Supports 2x2 video wall configuration with displays in landscape (horizontal) orientation.
  • More Features
  • Description
  • Diagrams
  • Downloads
  • Ordering Guide
  • Request Quotation
  • The SPLITMUX® 4x4 HDMI Quad Screen Multiviewer routes digital HDMI video and audio signals from four HDMI video sources (computers, Blu-Ray players, satellite receivers, etc) to four displays (monitors, HDTV's, projectors, etc). Each monitor is capable of displaying the video sources in quad, PiP, full, or custom mode. In custom display mode, each of the quadrants can be adjusted to any size and positioned to any location on the display. Additionally, it features a 2x2 video wall processor, which allows the video from a single source to be displayed across all four monitors.

    The SPLITMUX-4X4-HDVWC Features Include:
    • Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200.
    • Each input can be independently connected to any or all outputs.
    • Quad, Picture in Picture, and Full Screen display modes.
    • Fluid, real-time video performance with 60 frames per second (fps) in all four quadrants.
    • Supports 2x2 video wall configuration with displays in landscape (horizontal) orientation.
    • HDCP 1.4 compliant.
    • HDMI features supported:
    • HDMI 1.3
    • 10-, 12-, and 16-bit xvYCC, RGB, and YCbCr.
    • Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, DTS, LPCM 7.1, and LPCM 2.
    • Bandwidth up to 340 MHz (8 Gbps)
    • Lip Sync
    • Other Features Include:
    • Configure and control the multiviewer through front panel buttons, Ethernet, IR remote control, or RS232.
    • Switch audio independently of video from connected HDMI sources (e.g. source 1 and source 2 video are active while only source 3 audio is active).
    • Any DVI source can be connected by using the DVI-HD-xx-MM cable (not included).
    • Built-in EDID table
    • Option to copy EDID from any sink to one or all sources.
  • 4x4 HDMI Multiviewer / Video Matrix Switch

    4x4 HDMI Multiviewer / Video Matrix Switch

    2x2 Video Wall Configuration

    Display the video from one HDMI video source across four 1080p HDMI monitors.

    2x2 Video Wall Configuration

    Display Mode Examples

    Display Mode Examples
  • Data Sheets (pdf)
  • Technical Manuals (pdf)
  • Media Releases
  • Part Numbers
  • SPLITMUX-4X4-HDVWC
  • 4x4 HDMI Multiviewer / Video Matrix Switch / Video Wall Processor